PHILIPS OLEDS: TAKING THE NEXT STEP FORWARD IN SOLID STATE LIGHTING



OLEDs (Organic Light-Emitting Diodes) are the next step forward in the evolution of Solid State Lighting (SSL) technology, which generates light by semiconductors, rather than using a filament or gas. SSL lighting provides illumination that is more energy-efficient, longer-lasting and more sustainable. It also opens exciting new doors to how we can use, integrate and ‘play’ with light in our homes, cars, shops and cities. Philips’ work on LEDs (Light-Emitting Diodes) marked the first phase in the development of solid-state lighting, which is already revolutionizing the lighting industry. Now that the company’s expertise is being applied to OLEDs, even more groundbreaking SSL applications are becoming possible as well.

LEDs and OLEDs – the difference

LEDs and OLEDs both generate light by semiconductors – basically by stimulating electrons in their components with an electrical charge. They also share the ability to create color effects that go beyond the capabilities of incandescent lamps. They both share the potential to become extremely energy saving light sources. But there the resemblance ends. There are a number of differences between LEDs and OLEDs in their make-up, the type of light they produce and the way they can be used, complementing each other in terms of application used.

Organic vs. inorganic – another type of light

A key structural difference is that OLEDs are created using organic semiconductors (such as those that make up organic solar cells), while LEDs are built in crystals from an inorganic material. There are also visible differences between these two types of solid-state lighting. LEDs are glittering points of light – in essence, brilliant miniature bulbs. OLEDs, on the other hand, are extremely flat panels that evenly emit light over the complete surface. The illumination they produce is “calm”, more glowing and diffuse, and non-glaring. The thin, flat nature of OLEDs also makes it possible to use and integrate light in different ways than LEDs can – or any other lighting source for that matter. LEDs are excellent to create sharp beams, add drama and accent due to their compactness. OLEDs will never replace LEDs – they have their own very specific and useful types of application possibilities. The two, however, complement each other very well, providing different options in a new type of digital lighting that is becoming increasingly important in an energy-conscious world.

How OLEDS work

OLED lighting works by passing electricity through one or more incredibly thin layers of organic semiconductors. These layers are sandwiched between two electrodes – one positively charged and one negatively. The “sandwich” is placed on a sheet of glass or other transparent material which, in technical terms, is called a “substrate”.

When current is applied to the electrodes, they emit positive and negatively charged holes and electrons. These combine in the middle layer of the sandwich and create a brief, high-energy state called “excitation”. As this layer returns to its original, stable, “non-excited” state, the energy flows evenly through the organic film, causing it to emit light. Using different materials in the organic films makes it possible for the OLEDs to emit different colored light.

OLEDs today

Philips started researching OLEDs back in 1991, as part of its development of OLED display screens. The company began specifically focusing on OLED lighting applications in 2004. Since then, Philips has been at the forefront of new and rapid innovations in the field, which now have OLEDs poised to change the lighting world yet again.

Dramatic and unexpected

Even though Philips has just begun unlocking the potential of OLEDs, they already offer unique characteristics and capabilities that can redefine lighting, and the way we use and experience it. First, there is the subtly diffused – almost magical – nature of the illumination itself. OLEDs create soft glowing clouds of light, rather than bright rays. Then, there is their homogenous output, unusual appearance, low heat emission, extremely flat nature and high degree of controllability. These offer designers, artists, architects and others great freedom in creating groundbreaking new lighting concepts and experiences: ones that will greatly appeal to consumers by making it possible to change the atmosphere in a room in dramatic and unexpected ways.

Ready to produce

Philips already has various OLED panels available for commercial use as engineering samples. Recently, the company stepped up its efforts with the world’s first-ever production line for OLED lighting in Aachen, Germany. This marks a significant step forward in advancing OLED technology in the crucial area of manufacturing. Because of this, Philips will be one of the first companies to make OLED lighting technology commercially available on a large scale. The products, which will be marketed under the name of Lumiblade, will include OLED lighting plates of up to 50cm² in a wide range of colors and shapes.

OLEDs tomorrow

The OLED-based experiences for consumer and professional use that Philips is presenting at the Kong International Lighting Fair demonstrate what is already possible today. We can expect to see designers, architects and consumers increasingly using OLEDs in a variety of contexts over the next few years. This, however, is just the beginning. Research and development continue at top speed, conquering new and unexplored territory. Imagine ceilings glowing with color, glass walls that light up at the wave of your hand, or windows that provide subtle illumination after dark. The result is large areas of evenly distributed light that can be adjusted in brightness and color and can be applied to almost any surface in almost any shape. This is the exciting world of the OLEDs of the future.

Tunable color

Philips is already producing OLED panels in plain and ‘warm’ white, as well as a variety of beautiful colors. These are on display during the Hong Kong International Lighting Fair. The available palette will rapidly expand since, in principle, it is possible to create any color OLED you can imagine. But researchers at Philips are also working on creating tunable OLEDs – ones that you can change the color of whenever you wish. We anticipate color-tunable OLEDs becoming a reality over the next three to five years.

Invisible light

Today, OLEDs generally have a reflective, mirror-like surface when not illuminated. Another current area of research is on the development of completely transparent OLEDs, which will open many new doors in application possibilities. Transparent OLED panels will be able to function as ordinary windows during the day, and light up after dark, either mimicking natural light, or providing attractive interior lighting. During the day, they could also function as privacy shields in homes or offices. Look out for transparent OLED panels within the next three to five years.

Beyond illumination

The OLEDs currently available are mounted on glass. So far, glass is the only transparent substrate that sufficiently protects the material inside from the effects of moisture and air. However, scientists at Philips Research are investigating ways to make soft plastic substrates that will provide the necessary protection. This will open the way for flexible and moldable OLED lighting panels, making it possible for any surface area – flat or curved – to become a light source. We could see the development of luminous walls, curtains, ceilings and even furniture. Flexible OLED panels are likely to become available within five to eight years.

OH…LED! in action

Although all OLED luminaire concepts are stylishly designed and revolutionary, each one has a very different look and feel.

Table-top:  The table-top luminaire forms an elegantly streamlined, mirrored plane when the blade is vertical, but as soon as the blade is tipped at an angle, the OLEDs begin to glow. The blade contains 11 single-sided OLEDs, which are positioned towards the bottom of the blade and can be brightened or dimmed with hand gestures. A number of high-power LEDs are concentrated at the top of the blade. When the blade is pulled down towards the desktop, the decorative OLEDs dim and the functional LEDs increase in strength, projecting a brighter, clearer light that is more suitable for activities such as reading or writing. 

 Wall-mounted: In the wall-mounted concept, the blade is hinged to the wall, allowing it to be manipulated by the user through a simple rotation. The blade transforms from a compact panel against the wall into a three dimensional object suspended in space. It can be used for both decorative and functional purposes, with the type of light affected by the position of the blade. When not in use, the blade can be folded flat against the wall. In this position, the front of the blade, which holds 18 single-sided OLEDs, resembles a vertical mirror. The back features two different kinds of LED – ambi-light optic LEDs and high-power LEDs. When the blade is moved slightly away from the wall, the ambi-light optic LEDs are activated, washing the wall with soft light. If the blade is pulled out further, and angled away from the wall, the ambi-light begins to fade, and the OLEDs on the front of the blade instead start to cast a gentle, decorative light. Finally, if the blade is angled down towards the floor, the OLEDs dim, while the high-power LEDs light up, providing bright illumination downwards.



For further information, please contact:

Pansy Chan

Country Public Relations and Marketing

Philips Hong Kong

Tel: +852-2821-5237

E-mail: pansy.chan@philips.com