EN
ZH

Multimedia Speakers 2.1

SPA4350/10

Multimedia Speakers 2.1

SPA4350/10

Dynamic sound

We're perfect for music,voice and soundtracks. We'll bring life to the sound from your notebook, PC or MP3 player and you'll love our bigger sound output, enhanced sound performance and contemporary design.

Unfortunately this product is no longer available

Suggested retail price: HKD349.00

Multimedia Speakers 2.1

Dynamic sound

We're perfect for music,voice and soundtracks. We'll bring life to the sound from your notebook, PC or MP3 player and you'll love our bigger sound output, enhanced sound performance and contemporary design.

Dynamic sound

SPD™ innovative bass port technology for deep, rounded tones

SPD™ innovative bass port technology for deep, rounded tones

Philips Sound Purification Duct (SPD) bass port technology delivers the deep, pure tones of the original bass sound. Using an SPD foam material to process the inner surface of the bass pipe, the special acoustic damping invented by Philips reduces noise turbulence and stabilizes the tuning frequency. Philips technical and consumer tests confirm this buffer provides less colored, purer quality bass.

Band pass subwoofer design for accurate bass reproduction

Band pass subwoofer design for accurate bass reproduction

With its box-within-a-box design, this band pass subwoofer has two volume chambers to create more air capacity and deliver an altogether better bass sound with better balance and less distortion. The audio energy from the central driver is concentrated more effectively in the desired frequency output range, producing an overall sound image that is more focused and more accurately reproduced.

Well damped driver reduces vibration and sound distortion

Well damped driver reduces vibration and sound distortion

A single speaker driver normally incurs a specific frequency division vibration near the edge of the diaphragm, often resulting in some sound distortion. This way to overcome this problem by using Mylar, a uniform monomer and a much lighter material that is more usually used, around the driver cone. Surrounding the cone in a perfectly symmetrical ring, the resulting damping effect suppresses the asynchronous vibration, resulting in a more balanced and natural sound.

Curvilinear cabinet for well-rounded sound

Curvilinear cabinet for well-rounded sound

The curvilinear design of the cabinet not only looks good but is shaped to provide a balanced sound that emanates more naturally and in its original form. With less distortion and coloration, you can be assured that your favorite music will always sound the way it is supposed to. Philips knows acoustics and we make sure that sound not only sounds great, but looks great too!

30W RMS total output power

30W RMS total output power

Attractive high gloss finish

High-gloss 'Piano black' finish looks simply superb in both classic and modern interiors.

3 integrated power amplifier circuits for balanced sound

To keep the price down for most 2.1-channel multimedia speakers, the power amplifier circuit part is often overlooked, with a single power amplifier design becoming the focus. However, in this very sophisticated circuit design, Philips uses 3 integrated amplifier chips to drive the two satellite speakers and the subwoofer. The SPA4320 has a large built-in radiator, and the heat generated by the power amplifier circuit is dispersed by this heat sink. The UTC2030 amplifier chips provide a good solid foundation for quality sound and all the power needed to drive the subwoofer and satellites.

Technical Specifications

  • Sound

    Bass enhancement
    Bass reflex
    Frequency range
    50Hz – 20kHz (-10dB)
    Output power (RMS)
    Per satellite: 8W x 2 ; Subwoofer: 14W
    Music Power
    30  W
    Loudspeaker Enhancement
    Magnetic Shielded LSB
    Bass optimalization
    Yes
  • Loudspeakers

    Loudspeaker Enhancement
    Magnetic Shielded LSB
    Satellite speaker drivers
    2.5"
    Subwoofer driver
    4"
    Bass level control
    On subwoofer
  • Connectivity

    Audio input for data
    Stereo Audio (3.5 mm jack) 1x
    Cable length
    1.5m
    Connector
    3.5 mm stereo
  • Outer Carton

    Length
    68  cm
    Number of consumer packagings
    2
    Width
    37.8  cm
    Gross weight
    11.273  kg
    Height
    24.2  cm
    GTIN
    1 87 12581 62744 4
    Nett weight
    8.072  kg
    Tare weight
    3.201  kg
  • Power

    Power LED indicator
    Blue
  • Packaging dimensions

    Height
    33.3  cm
    Packaging type
    Carton
    Type of shelf placement
    Laying
    Width
    36.5  cm
    Depth
    22  cm
    Number of products included
    1
    EAN
    87 12581 62744 7
    Gross weight
    5.202  kg
    Nett weight
    4.036  kg
    Tare weight
    1.166  kg
  • Dimensions

    Amplify box
    [W x D x H] 133 x 94 x 102 mm
    Control box
    [W x D x H] 287 x 202 x 158 mm
    Satellite
    [W x D x H] 133 x 94 x 102 mm
    Subwoofer
    [W x D x H] 287 x 202 x 158 mm
    Weight
    5.202  kg
  • Packaging content

    Subwoofer
    Yes
    Number of satellites
    2
    3.5 mm stereo line cable
    Fixed
    Quick installation guide
    Yes

Suggested products

Recently viewed products

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.