Multimedia Speakers 2.1
SPA7355/12
- -{discount-value}
Multimedia Speakers 2.1
SPA7355/12PC speaker with powerful, rich sound
50W output supported by SPD™ patented bass port technology gives deep, rounded tones with less distortion with this SPA7355/12. The 2-way tweeter + woofer design produces both high and low to mid-range frequencies, maximizing output. See all benefits
Unfortunately this product is no longer available
This product qualifies for VAT relief
If you're eligible for VAT relief on medical devices, you can claim it on this product. The VAT amount will be deducted from the price shown above. Look for full details in your shopping basket.
Multimedia Speakers 2.1
PC speaker with powerful, rich sound
50W output supported by SPD™ patented bass port technology gives deep, rounded tones with less distortion with this SPA7355/12. The 2-way tweeter + woofer design produces both high and low to mid-range frequencies, maximizing output. See all benefits
Similar products
See all Speakers & headsets
SPD™ innovative bass port technology for deep, rounded tones
Philips Sound Purification Duct (SPD) bass port technology delivers the deep, pure tones of the original bass sound. Using an SPD foam material to process the inner surface of the bass pipe, the special acoustic damping invented by Philips reduces noise turbulence and stabilizes the tuning frequency. Philips technical and consumer tests confirm this buffer provides less colored, purer quality bass.
2-way tweeter + woofer design
A dual-range speaker with two drivers produces high frequencies from the tweeter and low and mid-range frequencies from the woofer. This maximizes output with a more balanced sound than that from the commonly used one-way structure, where a single driver has to produce all the frequencies. So you can enjoy better acoustics with clear vocals and high tones along with solid bass, and all for a very competitive price with this latest Philips range of speakers.
Mylar material tweeter for high definition sound
The unique Mylar material used in the tweeters ensures incredible sound definition. The full range of high frequencies is perfectly reproduced, so music comes to life and movies sound like they were meant to. An integral part of the 2-way design, the tweeter improves high frequencies resulting in cleaner, more spacious and more accurate sound in tandem with the woofer. Improved clarity means you can identify all the different elements in the music. Listen to the individual instruments, hear the vocals more clearly, enjoy your music in refreshing detail.
Convenient aux-in and headphone out on front of speaker
Now you can enjoy your favorite music and entertainment even easier and more conveniently, via the aux-in and headphone out jack on the front of these speakers. Usually, if you want to connect another device other than your PC you have to unplug the 3.5mm jack from the computer and that is not always expedient. But with the aux-in and headphone out connections on front you can quickly and easily listen to music straight from almost any device.
50W RMS total output power
This Philips speaker has 50W RMS total output power. RMS refers to Root Mean Square which is a typical measurement of audio power, or rather, the electrical power transferred from an audio amplifier to a loudspeaker, which is measured in watts. The amount of electrical power delivered to the loudspeaker and its sensitivity determines the sound power that is generated. The higher the wattage, the better the sound power emitted by the speaker.
PP driver material
The polypropylene (PP) material in the driver, which is soft, makes for better high frequency sounds. It can help rolling out and produces a purer sound with better clarity and balance. Easier to integrate with the tweeter, the use of this lightweight material results in less vibration.
Well damped driver reduces vibration and sound distortion
A single speaker driver normally incurs a specific frequency division vibration near the edge of the diaphragm, often resulting in some sound distortion. This way to overcome this problem by using Mylar, a uniform monomer and a much lighter material that is more usually used, around the driver cone. Surrounding the cone in a perfectly symmetrical ring, the resulting damping effect suppresses the asynchronous vibration, resulting in a more balanced and natural sound.
Attractive high gloss finish
High-gloss 'Piano black' finish looks simply superb in both classic and modern interiors.
Technical Specifications
-
Connectivity
- Cable length
- Power cord, audio cable, satellite cable : 1.3M
- Connector
- 3.5 mm stereo
-
Outer Carton
- Length
- 39.5 cm
- Number of consumer packagings
- 2
- Width
- 29.5 cm
- Gross weight
- 9 kg
- Height
- 54.6 cm
- GTIN
- 1 87 12581 64433 5
- Nett weight
- 7.8 kg
- Tare weight
- 1.2 kg
-
Power
- Power LED indicator
- Amber
-
Packaging dimensions
- Height
- 26.5 cm
- Packaging type
- Carton
- Type of shelf placement
- Laying
- Width
- 39.3 cm
- Depth
- 28.3 cm
- Number of products included
- 1
- EAN
- 87 12581 64433 8
- Gross weight
- 4.2 kg
- Nett weight
- 3.9 kg
- Tare weight
- 0.3 kg
-
Product dimensions
- Height
- 22.5 cm
- Width
- 21.7 cm
- Depth
- 22.5 cm
- Weight
- 2.924 kg
-
Packaging content
- Subwoofer
- Yes
- Number of satellites
- 2
- 3.5 mm stereo line cable
- Fixed
- Quick installation guide
- Yes
- Remote Control
- Wired
-
Audio system
- Frequency range
- 20Hz-20kHz
- Output power in total
- 50W
- Input impedance
- 20Kohm
- Signal/Noise ratio
- >75dB
- Power
- 220V 50Hz
- THD
- <1%
-
Audio systems L/R channels
- Audio power amplifier
- Class-AB Amplifier
- Channel separation
- >45dB
- Rated output power
- 12.5W x2
- Input sensitivity
- 320mV
-
Left/Right speakers
- Driver power range
- 1-30Wx2
- Speaker driver
- 2.75" full range + 1" mylar tweeter
- Frequency range
- 80Hz-20kHz
- Norminal impedance
- 4ohm
- Sensitivity
- 86dB(2.83V/1m)
-
Subwoofer audio systems
- audio power amplifier
- Class-AB Amplifier (BTL)
- Input sensitivity
- 110mV
- Rated outputer power
- 25W
-
Subwoofer speaker
- Driver power range
- 2-120W
- Frequency range
- 45Hz-200Hz
- Norminal impedance
- 4ohm
- Sensitivity
- 88dB(2.83V/1m)
- Speaker driver
- 5.25"
