How to improve the picture quality of Philips TV?

• Make all your cables as short as possible.
• Use high quality antenna cable.
• Connect the plugs well into their sockets.
• Do not use an antenna cable splitter. Splitting the signal will make it considerably weaker.
• Change the picture settings on your TV. The standard configuration is set to match the conditions in a TV shop.

You can use the [Smart mode] button on the remote control to set your TV to a predefined picture mode that will give you the best picture quality.

1. Press the [Menu] button on the remote control to access the main menu.

2. Select [Picture settings] and press the cursor [Right] to access the picture menu.

3. Press the cursor [Up] or [Down] to access the [Picture] settings.

4. Press the cursor [Right] to select and the cursor [Up] or [Down] to adjust them according to your preferences.

5. Press the [Menu] button to exit the menu.

6. Switch on the [Active control] on your TV.

1. Press the [Menu] button on the remote control to access the main menu.
2. Press the cursor [Down] to select [Advance picture] and press the cursor [Right] to access the advance picture menu.
3. Press the cursor [Up] or [Down] to select [Active control] and press the cursor [Right].
4. Select [ON + LIGHT SENSOR] and press the [OK] button to confirm your selection.
5. Press the [Menu] button to exit the menu.